Bench Project
When we first moved into our new house Tony and I bought a vintage vanity on Craigslist for $20 to go in our spare bedroom. The vanity is used to hold all of my “get ready in the morning stuff”. The vanity came with a little vanity bench. The problem was that the bench didn’t match the vanity. The bench was painted white and had obviously been recovered with some purple material. I had thought about painting the vanity a shabby white, but that wouldn’t solve the whole problem. The styles and sizes of the vanity and the bench didn’t even match. So, I put the bench up for sale on Craigslist, again. After a couple of weeks the bench still hadn’t sold. Well, another project for me!
I liked the chipped white paint of the bench, so I decided to keep it. I also decided that there were too many things, including another, smaller vintage vanity seat already in the spare bedroom. I thought that the front porch could use something, so that was to be the new home of the bench. We have a small, white ice cream table and two chairs on the porch, but nothing else so far. The white would be a perfect match. I have also had my eyes peeled for some of those vintage metal lawn chairs. I want two of them in red, or to paint red. That helped me make my choice for fabric. I chose a white material with a red coral pattern.
Last night I started ripping old fabric off the bench. Come to find out there was not only one layer of awful fabric, but three! Here’s the before photo:
The next layer. Even worse:
And the final dingy layer:
But, here’s what it looks like all spruced up:
I think its really cute now. I will show you pictures of what it looks like on the porch once I get the ice cream set repainted!
New Old Shade
Its official. I am sick of our curtains. All of them. Every room. I knew they were bad from the day we moved in, but now I am at my breaking point. So, on my day off yesterday I did some work and started plunging into our curtain situation.
I thought I would start off small. There was no shade over the large window in our kitchen door. Our neighbors could see right in! I decided to take the old white roller shade from the dining room door (since it also has a curtain) and refinish it to go in the kitchen. I wanted to stick with the black and white theme. I used some swirly scrap-book stencils I had and a paint pen ($3 at Wal-Mart). I laid the stencils out where I liked them, traced, and colored in. Now, viola!
What a simple , inexpensive project with such great results! This weekend I plan to get some black material and sew a valance at the top, as well as simple black curtains to replace the strawberry ones in the kitchen window. Then on to the rest of the house…
P.S. Yes, there is a cute in the shade. The landlord has mis-cut part of the shade. I didn’t want to try out my new paint idea on a new shade and ruin it. We like it well enough that I will soon go through the time and effort to reproduce this on a new shade!
Protect The Camera
Yesterday was my first Thursday off now that I have started working four ten hour days and taking Thursdays off. It was a busy day and I think I may have worked harder at home that I do during a work day in my office! But, this means my house is sparkling and I even finished a few projects. Once simple one that I finally tackled was making a camera pouch! My camera travels with me almost all the time. You never know when you are going to see something blog-worthy! 🙂 This means that my camera has acquired a few scratches and dings along the way, though. To prevent this I could have bought a fancy (and probably expensive) camera bag, yes. But, other than not wanting to fork over that much cash, I think they tend to be a bit too big to lug around in my purse all the time. So, enter my simple DIY camera bag! (I’m not a very good seamstress, so believe me, this is a very simple DIY!)
I used a rectangular strip of some soft leftover leopard fabric that I had lying around the house. I folded it in half with one end a few inches longer than the other, with the leopard print facing each other (inside out). I sewed the sides together next. Then sewed a seam on the extra top flap of material. Once the sewing was done I flipped it inside out and added a bit of Velcro to keep the top flap closed. That simple!
The material and my little sewing kit (I did this little project by hand).
Finished camera pouch:
No more scratches!
Making A Mini Bar
Currently we hold all of our drink glasses, servers, shakers and wine and liqueurs in one of our kitchen cupboards. But, I have always wanted to do something different with these items. I would like to have some sort of mini bar in the kitchen or dining room. This would be such easy access for entertaining. Also, it would free up more cupboard space in the kitchen, which for us is at a premium!
I have recently seen a few photos of DIY bars and am in planning process for making one of our own.
This redone shelf unit was posted on Apartment Therapy. I think this is great inspiration for our project. A simple shelf unit like this would be easy to find and probably affordable. I really love the wine racks and glass holders. I also like the idea of lining the backs of cabinets with colorful ,fun paper. Here is another picture of a mini bar with beautiful paper:
http://www.apartmenttherapy.com/chicago/inspiration/inspiration-lined-cabinets-075583 . Originally from Homes and Gardens.
I also like the idea of using a bar cart or serving tray with a few bottles and glasses, but options like the cabinets in the pictures would give us much more space and probably be safer with pets, especially if there are doors.
I am very excited to get started on this project, and will keep you posted!
Something I Love
Through my many recent projects I have found a product that I love. Undo Adhesive Remover! This stuff is amazing. I started using it while scrap-booking. You stick a sticker to a page and realize that you want to move it. No problem for Undo. It not only removes the sticker with no harm to the paper or the sticker, but it also brings the sticker back to it’s original stickiness when it dries! I have also used this to un-peal photos and other papers that I have stuck down with glue.
After using and loving this product on my scrap-book, I decided that it was worth a shot on other projects as well. Yes, it can safely un-stick stamps, labels, and even gunk. The possibilities are endless! My next project involves a very pretty bottle of liqueur that I would like to remove the label from. I want to leave the label in good condition to use for something, and also have the bottle sticky-free for use for something. No problem for Undo, I’m sure.
I highly recommend for every do-it-yourself-er!
Cube Redo
I have had this little storage cube since I was a kid. When new, it had a unicorn and a rainbow on it. Recently I redid the look of the cube so that it could be used in our home. I forgot all about the cube project until yesterday. There was a question posed on Apartment Therapy about recommendations for redoing a similar cube. I thought that I would let you all know how I did the project, and although I do not have any before or durring pictures, I can show you how it turned out. Here was the process:
1. I started by covering the picture areas of the cube with white contact paper. I was lucky that the sides were the same width as the paper, but I did run short of paper at the top and had to piece two pieces together. For a bigger box this is what you would have to do. Not to worry, the seem barely shows once you get the paint on the paper. Just try to line them up as exactly as possible.
2. Once the paper was on, I used an Exact-O knife to cut the contact paper around any hardware or latches. This worked well and really didn’t cause any problems as long as you work slowly and patiently.
3. After the paper was laid and cut, I painted it. I picked a dark red, and simply used wall paint from the hardware store and applied with a regular brush. I recommend this, as it was easy and inexpensive. I personally wanted an antiqued look to go with the worn metal hardware, so I only applied one coat and left it a bit streaky. If you want a smooth, more flawless finish, I think two coats would do the trick just fine.
4. To add a personal touch I used a foam stamp. I found this stamp at the hardware store on sale for about 50 cents. While the paint was still wet I pressed the dry stamp into it in a pattern I liked. When you raise the stamp it takes some of the paint off, leaving a lighter area for the design. I used a circular design that went with the antiqued look.
Viola! Finished! It really was that simple. Now this cube serves as storage for blankets in our living room. And, this has stood up to some use and abuse and even relocating a few times. It has a few small scratches in it now, but that seems to add to it’s antiqued character. If you want yours to stay looking new try using a protective clear coat on top. Here’s what ours looks like:
Some foam stamps similar to mine can be find at http://www.makingmemories.com and other scrap-booking websites.
Have fun!
Little Coaster Project
Tony has Dallas Cowboys coasters. I have Chicago Bears coasters. Neither were going to be displayed in our nice living room. I love football as much as anybody, but the football paraphernalia is reserved for the basement game room/bar. So, we needed some nice coasters to protect our living room tables. I change my mind frequently, so I wanted something inexpensive or changeable. That’s when I found these. The Dollar Store had a pack of four glass coaster for a couple bucks! Not only are they cheap, but they are changeable. They are the kind of coasters meant for inserting a picture under the glass. I decided to put a piece of black and silver damask wrapping paper in the picture slot. Here was my process:
My supplies. All I used was a scissors and the material (wrapping paper).
I used the blank piece of paper that came in the frame as a guide to cut a rectangle out of the wrapping paper. It then slides into a clear picket in the coaster frame. It was really THAT simple.
This is what it looked like slid into the coaster frame.
Here they all are with the wrapping paper inserted.
They even have their own little wooden holder.
It was so simple and I can change what is in the frames any time I want to. The glass is also very easy to clean off. I wish they were all black, as I am not so fond of the different colors, but it does make it easier to keep track of your drink. And, for a few dollars, who can complain?
I’m A {Wedding} Geek
Yup, its true. I’m a geek. I love to plan, and organize, and make lists, and check things off…
So, planning for the wedding is no different. I decided to put the wedding planning ideas onto paper and stay organized. There are so many thoughts bouncing around in my head right now, this was the only way to keep sane!
I checked into wedding planners. But, they seemed like a crazy waste of money, as they can be upwards of $50! Some are very cute, and yes, it is a great way to keep the memories of the process, and even pass the information along to other brides-to-be, but…
I decided (after very little debate) to make my own. I got a thin, white three-ring binder and put tabs in it. I labeled the tabs into categories I thought would be most helpful. These tabs have changed a few times, but I think I finally have it. I also bought some cute post-it notes and sticky tabs to make notes and mark things. I have scoured the blog world for ideas and inspiration, and have used these resources to put the information into the planner. Everything will be at my fingertips. I even found printable versions of budgets and timelines to keep the planner organized. Other images in the planner have come from various bridal magazines. As we get closer to the big day we won’t miss a single detail with my geeky planning skills and my beautiful, new, handmade, planner.
These are the tabs I have used so far:
- Guest List
- Budget
- Resources
- Dress Ideas
- Brides Maids
- Tuxes
- Invitations
- Music
- Food
- Reception Ideas
- Gifts
- Day Of
These tabs could be different for everyone, but since I am doing almost everything myself, I had to keep many different categories. I am also splitting some of the categories down further into sub-categories, such as Reception Ideas. There will be tabs for things such as cakes, flowers and tables. I also inserted to clear pocket pouches in the binder, one for contracts and one for reciepts. This way the items in the pockets do not need holes punched in them.
If any of you other planning brides-to-be out there need any help getting organized, or have helpful hints, feel free to send me a message!
All of my materials, magazines, and books spread out on the floor to work!
My Planner! I simply printed up this simple, but pretty cover on the computer, printed it, and inserted into the binder pocket.
The inside of the planner. This is a budget page. You can see the tabs as well as some post-it notes.
One of the images in the planner. I simply love this suit, the vintage pinstripes, and the bow tie! It is even in our colors. The boutonierre can be made with Martha Stewart's help. We might be reproducing the whole picture!
P.S. My materials for this planner all came from Wal-Mart. They are very inexpensive, and have a pretty good selection. Yes, there are beautiful papers online, but I was to impatient to wait for something to come in the mail. The black and white damask post-its are adoarable and affordable there. That print is also available in many other supplies!
eHow To The Rescue
My grandmother gave me a tiny cast iron skillet the other day. I know that these pans are much sought after, but have never owned one. Although this one is just a baby she said you could use it for an egg or just to hang on the wall. So, I was going to do both. But, the skillet has some rust problems. I know that you can removed rust from other metals using steel wool, but how to remove it from cast iron? I looked it up on eHow. I haven’t tried it yet, but they do have instrucitons for rust removal:
I Feel A Project Coming On
I ran accross this oh-so-cute project this morning on the Curbly website.
Even though this DIY serving tray isn’t my idea, I had to link you all with it. I am most definitely going to make this my next project in the waiting. I have been looking at trays and also thinking about how to make one. But, with my love of all things black and white and my love of all things DIY, this is the winner. Check out the full how-to and more photos here: http://www.curbly.com/DIY-Maven/posts/5902-How-to-Turn-an-Old-Cupboard-Door-into-a-Serving-Tray
Thank you for the idea DIY Maven!
Make Mine Eclectic 